日韩欧美在线国产精品,日韩精品亚洲

128x64液晶KS0108驅動程序(C51)

【字體：

】

＃i nclude "absacc.h"
＃i nclude "intrins.h"

//自定義庫 在"C:\comp51\UserLib\"文件夾中
＃i nclude ".\inc\ASCII816.h" //標準ASCII庫
＃i nclude ".\inc\HZTable.h" //漢字點陣庫(自做)
＃i nclude ".\inc\Menu.h" //菜單庫(自做)

// LCD128*64 數據線
#define LCD12864DataPort P1

// LCD128*64 I/O 信號管腳
sbit di =P3^1; // 數據\指令選擇
sbit rw =P3^3; // 讀\寫 選擇
sbit en =P3^2; // 讀\寫使能
sbit cs1 =P3^4; // 片選1,低有效(前64列)
sbit cs2 =P3^5; // 片選2,低有效(后64列)

sbit reset=P0^7; // 復位

/*----------------------------------------------------------------------------------------------------*/
/* ****函數列表****

//開關顯示
void SetOnOff(unsigned char onoff)

//選擇屏幕
//screen: 0-全屏,1-左屏,2-右
void SelectScreen(unsigned char screen)

//清屏
//screen: 0-全屏,1-左屏,2-右
void ClearScreen(unsigned char screen)

//顯示8*8點陣
//旋轉90度:字模被豎著切分
//lin:行(0-7), column: 列(0-15)
//address : 字模區首地址
void Show88(unsigned char lin,unsigned char column,unsigned int address)

//顯示8*16字符
//旋轉90度:字模被豎著切分
//lin:行(0-3), column: 列(0-15)
//character:字符代碼(標準ASCII碼)
void ShowChar(unsigned char lin,unsigned char column,unsigned char character)

//顯示8*16字符串
//!!!只能顯示在一行上即: 串長+column <=15
//旋轉90度:字模被豎著切分
//lin:行(0-3), column: 列(0-15)
//address : 字模區首地址
void ShowString(unsigned char lin,unsigned char column, unsigned char *string)

//顯示一個漢字
//旋轉90度:字模被豎著切分
//lin:行(0-3), column: 列(0-15)
//hzcode: 漢字代碼(自定義的)
void ShowHZ(unsigned char lin,unsigned char column,unsigned int hzcode)

//顯示圖片
//旋轉90度 :字模被豎著切分
//startline :開始行
//startcolumn:開始列
//linechar :圖片行點除8(圖片以8*8點陣為單位)
//columnchar :圖片列點除8(圖片以8*8點陣為單位)
//address : 字模區首地址
void ShowPicture(unsigned char startline,unsigned char startcolumn,unsigned char linechar,unsigned char columnchar,unsigned int address)
//!!問題大戶
//顯示一行漢字
//lin:行
//lineheadaddr: 此行漢字代碼區首地址
void ShowLine(unsigned char lin,unsigned int lineheadaddr)

//顯示一屏漢字
//pageheadaddr:此屏漢字代碼地址區首地址
void ShowPage(unsigned int pageheadaddr)

//反顯一個8*8字塊
//lin:行(0-3), column: 列(0-7)
void ReverseShow88(unsigned char lin,unsigned char column)

//反顯一個字符
//lin:行(0-4), column: 列(0-15)
void ReverseShowChar(unsigned char lin,unsigned char column)

//反顯一個漢字
//lin:行(0-3), column: 列(0-7)
ReverseShowHZ(unsigned char lin,unsigned char column)

//反顯一行漢字
//lin:行
ReverseShow(unsigned char lin)

//初始化LCD
void InitLCD()

****函數列表結束**** */
/*----------------------------------------------------------------------------------------------------*/
/*--基本函數源程序------------------------------------------------------------------------------------*/
//延時
Lcd12864delay()
{
unsigned int i=500;
while(i--) {;}
}
/*----------------------------------------------------------------------------------------------------*/
//狀態檢查
void CheckState()
{
unsigned char dat;
di=0;
rw=1;
do{
LCD12864DataPort=0xff;
en=1; dat=LCD12864DataPort; en=0;
dat=0x90 & dat; //僅當?shù)?,7位為0時才可操作
}while(!(dat==0x00));
}
/*----------------------------------------------------------------------------------------------------*/
//寫顯示數據
//dat:顯示數據
void WriteByte(unsigned char dat)
{
CheckState();
di=1; rw=0;
LCD12864DataPort=dat;
en=1; en=0;
}
/*-----------------------------------------------------------------------------------------------------*/
//向LCD發送命令
//command :命令
SendCommandToLCD(unsigned char command)
{
CheckState();
rw=0;
LCD12864DataPort=command;
en=1; en=0;
}
/*----------------------------------------------------------------------------------------------------*/
//設定行地址(頁)--X 0-7
void SetLine(unsigned char line)
{
line=line & 0x07; // 0<=line<=7
line=line|0xb8; //1011 1xxx
SendCommandToLCD(line);
}
//設定列地址--Y 0-63
void SetColumn(unsigned char column)
{
column=column &0x3f; // 0=<column<=63
column=column | 0x40; //01xx xxxx
SendCommandToLCD(column);
}
//設定顯示開始行--XX
void SetStartLine(unsigned char startline) //0--63
{
startline=startline & 0x07;
startline=startline|0xc0; //1100 0000
SendCommandToLCD(startline);
}
//開關顯示
void SetOnOff(unsigned char onoff)
{
onoff=0x3e | onoff; //0011 111x
SendCommandToLCD(onoff);
}
/*---------------------------------------------------------------------------------------------------*/
//選擇屏幕
//screen: 0-全屏,1-左屏,2-右屏
void SelectScreen(unsigned char screen)
{ //北京顯示器:負有效 cs1: 0--右; cs2: 0--左
switch(screen)
{ case 0: cs1=0;//全屏
_nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_();
cs2=0;
_nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_();
break;
case 1: cs1=1;//左屏
_nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_();
cs2=0;
_nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_();
break;
case 2: cs1=0;//右屏
_nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_();
cs2=1;
_nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_();
break;
}
}
/*---------------------------------------------------------------------------------------------------*/
//清屏
//screen: 0-全屏,1-左屏,2-右
void ClearScreen(unsigned char screen)
{ unsigned char i,j;
SelectScreen(screen);
for(i=0;i<8;i++)
{ SetLine(i);
for(j=0;j<64;j++)
{
WriteByte(0x00);
}
}
}
/*--------------------------------------------------------------------------------------------------*/
//顯示8*8點陣
//旋轉90度:字模被豎著切分
//lin:行(0-7), column: 列(0-15)
//address : 字模區首地址
void Show88(unsigned char lin,unsigned char column,unsigned int address)
{ unsigned char i;
if(column>16) {return;}
if(column<8) SelectScreen(1); //如果列數<8(0,1,2,3,4,5,6,7)則寫在第一屏上
else {
SelectScreen(2); //否則 (8,9,10,11,12,13,14,15)寫在第二屏上
column=column & 0x07; //防止越界
}
SetLine(lin);
SetColumn(column<<3);
for(i=0;i<8;i++) WriteByte( CBYTE[address+i] );
}
/*------------------------------------------------------------------------------------------------*/
//顯示8*16字符
//旋轉90度:字模被豎著切分
//lin:行(0-3), column: 列(0-15)
//character:字符代碼(標準ASCII碼)
void ShowChar(unsigned char lin,unsigned char column,unsigned char character)
{ lin=lin<<1;
Show88(lin ,column,ASCII816[character-0x20] );
Show88(lin+1,column,ASCII816[character-0x20]+8 );
}
/*-----------------------------------------------------------------------------------------------*/
/*
//顯示8*16字符串
//!!!只能顯示在一行上即: 串長+column <=15
//旋轉90度:字模被豎著切分
//lin:行(0-3), column: 列(0-15)
//address : 字模區首地址
void ShowString(unsigned char lin,unsigned char column, unsigned char *string)
{ unsigned char ch;
unsigned char i=0;

while(*string!='\0')
{
ch=*string;
if(i+column >15) break; //(只能顯示在一行上即: 串長+column <=15)
ShowChar(lin,i+column,ch);
string++; i++;
}
}
*/
/*----------------------------------------------------------------------------------------------*/
//顯示一個漢字
//旋轉90度:字模被豎著切分
//lin:行(0-3), column: 列(0-7)
//hzcode: 漢字代碼(自定義的)
//uchar code HZtable
void ShowHZ(unsigned char lin,unsigned char column,unsigned int hzcode)
{
lin=lin<<1; //lin*2

Show88(lin,column,HZTable[hzcode]);
Show88(lin,column+1,HZTable[hzcode]+8);
Show88(lin+1,column,HZTable[hzcode]+16);
Show88(lin+1,column+1,HZTable[hzcode]+24);
}
/*----------------------------------------------------------------------------------------------*/
//顯示圖片
//旋轉90度 :字模被豎著切分
//startline :開始行
//startcolumn:開始列
//linechar :圖片行點除8(圖片以8*8點陣為單位)
//columnchar :圖片列點除8(圖片以8*8點陣為單位)
//address : 字模區首地址
void ShowPicture(unsigned char startline,unsigned char startcolumn,unsigned char linechar,unsigned char columnchar,unsigned int address)
{ unsigned char i,j;
for(i=0;i<columnchar;i++)
for(j=0;j<linechar;j++)
Show88(startline+i , startcolumn+j , address+(i*linechar+j)*8 );
}
/*----------------------------------------------------------------------------------------------*/
//顯示一行字符串(漢字,字母混排,一行16字節)
//lin:行
//lineheadaddr: 此行漢字代碼區首地址
void ShowLine(unsigned char lin,unsigned char linehead[])
{ unsigned char i;
unsigned char byte;
unsigned int hzcode;
for( i=0; i<16; )
{ byte=linehead[i];
if(byte < 0x80) //字母
{
if(i>15) return; //!!編譯器有問題,須強制退出

ShowChar(lin, i , byte);
i=i+1;

}
else // byte >= 0x80(漢字)
{
if(i>15) return; //!!編譯器有問題,須強制退出

byte=byte & 0x7f; //最高位置0,即:減去0x8000
hzcode=(unsigned int)byte<<8; //?? //高8位
hzcode=hzcode+linehead[i+1]; //加低8位,組合成整型數地址
ShowHZ( lin,i,hzcode);
i=i+2;
}
}
}
/*----------------------------------------------------------------------------------------------------*/
//顯示一屏漢字
//pageheadaddr:此屏漢字代碼地址區首地址
void ShowPage(unsigned char pagehead[][16])
{ unsigned char i;
for(i=0;i<4;i++) ShowLine(i,pagehead[i]); //1行8個漢字,16字節
}
/*----------------------------------------------------------------------------------------------------*/
//讀顯示數據
unsigned char ReadByte()
{
unsigned char dat;
CheckState();
di=1; rw=1;
LCD12864DataPort=0xff;
en=1; dat=LCD12864DataPort; en=0;
return(dat);
}

/*----------------------------------------------------------------------------------------------------*/
//反顯一個8*8字塊
//lin:行(0-3), column: 列(0-7)
void ReverseShow88(unsigned char lin,unsigned char column)
{ unsigned char i;
unsigned char tab[8];

if(column<8) SelectScreen(1); //如果列數<4(0,1,2,3),則寫在第一屏上
else SelectScreen(2); //否則 (4,5,6,7), 寫在第二屏上
//讀上部8列
column=column<<3; //每個方塊8*8大小
SetLine(lin);
SetColumn(column);
tab[0]=ReadByte(); //空讀!!!!! //?
for(i=0;i<8;i++) tab[i]=~ReadByte();
//寫回
SetLine(lin);
SetColumn(column);
for(i=0;i<8;i++) WriteByte(tab[i]);
}
/*----------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------*/
//反顯一個字符
//lin:行(0-4), column: 列(0-15)
void ReverseShowChar(unsigned char lin,unsigned char column)
{ lin=lin<<1;
ReverseShow88(lin ,column);
ReverseShow88(lin+1,column);
}
/*----------------------------------------------------------------------------------------------------*/
//反顯一個漢字
//lin:行(0-3), column: 列(0-7)
ReverseShowHZ(unsigned char lin,unsigned char column)
{
lin=lin<<1;
column=column<<1;
ReverseShow88(lin ,column );
ReverseShow88(lin ,column+1);
ReverseShow88(lin+1,column );
ReverseShow88(lin+1,column+1);
}
/*----------------------------------------------------------------------------------------------------*/
//反顯一行漢字
//lin:行
ReverseShow(unsigned char lin)
{ unsigned char i;
for(i=0;i<8;i++) ReverseShowHZ(lin,i);
}
/*----------------------------------------------------------------------------------------------------*/
void InitLCD() //初始化LCD
{ unsigned char i=250; //延時
while(i--);

//reset=0;//復位
//reset=1;

SelectScreen(0);
SetOnOff(0); //關顯示

ClearScreen(1);//清屏
ClearScreen(2);

SelectScreen(0);
SetOnOff(1); //開顯示
SelectScreen(0);
SetStartLine(0); //開始行:0
}
/*----------------------------------------------------------------------------------------------------*/

void Reset() //液晶復位
{
//reset 低復位 _|-
reset=0;
_nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_();
reset=1;

//全屏
cs1=0;
_nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_();
cs2=0;
_nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_(); _nop_();
SendCommandToLCD(0x3F);

}

上一篇： Freescale c 語言例子液晶時鐘

下一篇：沒有了