|
|
//**********************************************寫入1字節到eerom********************************//////
void write_eprom(unsigned char date,unsigned char addr)
{
while(wr==1);//等待寫周期完成
eeadr=addr;//準備要寫入的地址
eedata=date;//準備要寫入的數據
eepgd=0;//to data memory
wren=1;//允許寫
gie=0;
eecon2=0x55;
eecon2=0xaa;
wr=1;//啟動寫周期
while(wr==1);//等待寫周期完成
gie=1;
wren=0;
}
//****************************************************讀取設定值**********************************************
unsigned char read_eprom(unsigned char addr)
{
eeadr=addr;
eepgd=0;
rd=1;
return eedata;
} | | |
LIST P=16f877
＃i nclude <P16f877.INC>
;
;- RAM LOCATIONS------
;
; Reserve RAM location 0x70 for ICD
;
Data_EE_Addr equ 0X71
Data_EE_Data equ 0X72
;--------VECTORS------------
org 0x0
nop
goto START
;-------PROGRAM--------------
org 0X20
START
call INIT
;
;---- Test the WRITE EEPROM Routine ----
;
MOVlw 0x0
MOVwf Data_EE_Addr
MOVlw '0' ; Load a ASCII code "0" to W
MOVwf Data_EE_Data
EE_Write
call WRITE_EEPROM
incf Data_EE_Data,F ; 0x30+ N
incf Data_EE_Addr,F ; Point to next EEPROM Address
btfss Data_EE_Addr,5 ; Write 32 bytes ?
goto EE_Write
;
;---- Test the READ EEPROM Routine ----
;
MOVlw 0x20 ; Get back EEPROM data to RAM with start addr at 0x20
MOVwf FSR
;
MOVlw 0x0 ; Point to EEPROM start address at 0x00
MOVwf Data_EE_Addr
EE_Read
call READ_EEPROM ; Read EEPROM data with curent address to W registre
MOVwf INDF ; move W --> RAM
;
incf FSR,F
incf Data_EE_Addr,F ; Point to next EEPROM Address
btfss Data_EE_Addr,6 ; Read 32 bytes ?
goto EE_Read
;
GOTO $
;
;------ INTERNAL EEPROM READ ------
;
READ_EEPROM
banksel EEADR
MOVf Data_EE_Addr,W ; Load EEPROM Address into Pointer
MOVwf EEADR
;
; bcf INTCON,GIE
banksel EECON1
bcf EECON1,EEPGD
bsf EECON1,RD
;
banksel EEDATA
MOVf EEDATA,W
; bsf INTCON,GIE
;
banksel PORTA
return
;
;----INTERNAL EEPROM WRITE-----
;
WRITE_EEPROM
banksel EEADR
MOVf Data_EE_Addr,W ; Load EEPROM Address & Data into Register
MOVwf EEADR
MOVf Data_EE_Data,W
MOVwf EEDATA
;
banksel EECON1
bcf EECON1,EEPGD ; Selected Data EEPROM for Writing
bsf EECON1,WREN ; Enable write function
; bcf INTCON,GIE ; Disable Interrupt
MOVlw 0x55 ; Write Sequence control
MOVwf EECON2
MOVlw 0xAA
MOVwf EECON2
bsf EECON1,WR ; Start EEPROM write operation
;
; bsf INTCON,GIE ; Enable Interrupt (If used interrupt )
bcf EECON1,WREN ; Disable write EEPROM
;
btfsc EECON1,WR ; Waiting for writing completed (4mS)
goto $-1 ; During write period, must hold both EEADR & EEDATA until complete
;
banksel PORTA
return
;
;---------INITIAL----------------
INIT
BCF PIR2,EEIF
banksel PIE2
BCF PIE2,EEIE
RETURN
;--------------------------------
END
66821730(技術支持)
